CASE
CASE ACCESSORY
POWER SUPPLY
COLD CATHODE LIGHT
LED LIGHT
INPUT DEVICE
MULTIMEDIA SPEAKERS
CCFL KIT
CCFL MODULE
CABLE / CONNECTOR
COLD CATHODE LAMP
12VDC LED LIGHT
REMOTE CONTROL
12VDC REMOTE CONTROLLED LATCH RELAY
12VDC REMOTE CONTROLLED MOMENTARY RELAY
12VDC REMOTE CONTROLLED POLARITY REVERSIBLE RELAY
12VDC REMOTE CONTROLLED MULTI ZONE FUNCTION RELAY
110V ADAPTER W/ REMOTE CONTROL
ACCESSORY
PC REMOTE CONTROL
CABINET LIGHT
CORNER LED LIGHT
3C ACCESSORY
CPU COOLING
VGA / CHIP COOLING
UNIVERSAL COOLING
INTEL COOLING
AMD COOLING
COOLING FAN
 
  
Welcome to Logisys! Your partner to make computer more than just a computer!
 
  
Meticulous Attention to consistent and quality supply in today’s PC industry!

To provide resellers with value-added products and services with the latest stylish design, advanced functionality and, most importantly, reliability in the fields of computers, electronics and communication in general.
 
  
  
  12VDC On and Off Control with Polarity Change
  Model #: RM03

    This is a 12V DC momentary mode On and Off relay with polarity switch by pressing the other button when the receiver is on OFF mode. Both left and right buttons control ON and OFF for one polarity, and each button will change the polarity from the previous polarity when the receiver is set at OFF mode.
    The package contains one receiver and two key-chain style handsets.

    Use Guide:
    Both buttons control ON and OFF. The left button controls the initial ON and OFF at the initial polarity, the right button changes the polarity to the opposite and turns it ON by pressing it once when the initial polarity is set at OFF. The left button can switch it back to the initial polarity again when the other polarity is at the OFF mode.

    Wiring Instruction:
    The two WHITE wires are 12V DC output. Either of the wires will serve as ground and light wire depends on which polarity is chosen.
    The BLUE wire is antenna wire. The RED and BLACK wires are 12V DC wires. The two white wires are the 12 V DC output - since this relay unit switches polarity, either wire can be the ground or the live wire depending on the status of the unit. The blue wire is the antenna wire. The red wire is the 12 V DC input wire and the black wire is the input power ground wire.


Home |  EEFL OEM |  New Products |  News |  About Us |  Contact Info |  Where to Buy |  Reviews & Awards |  12V Remote FAQ
Copyright 2012 Logisys Computer Inc. All rights reserved!