CASE
CASE ACCESSORY
POWER SUPPLY
480W ATX Power
AT & MINI ATX POWER
AC/DC Adapter / Power
550W~575W ATX Power
600W~750W ATX Power
Battery & Charger
COLD CATHODE LIGHT
LED LIGHT
INPUT DEVICE
MULTIMEDIA SPEAKERS
CCFL KIT
CCFL MODULE
CABLE / CONNECTOR
COLD CATHODE LAMP
12VDC LED LIGHT
REMOTE CONTROL
CABINET LIGHT
CORNER LED LIGHT
3C ACCESSORY
CPU COOLING
VGA / CHIP COOLING
UNIVERSAL COOLING
INTEL COOLING
AMD COOLING
COOLING FAN
 
  
Welcome to Logisys! Your partner to make computer more than just a computer!
 
  
Meticulous Attention to consistent and quality supply in today’s PC industry!

To provide resellers with value-added products and services with the latest stylish design, advanced functionality and, most importantly, reliability in the fields of computers, electronics and communication in general.
 
  
  
  12VDC / 24VAC 9A POWER DISTRIBUTION
  Model #: PD10

    PD10 is a dual voltage power distribution box. Distribution box accepts either 24VAC or 12VDC and distributes it to 10 output screw terminals at 900mA per channel. It has LED indicator and over current protection. It is a safe yet effective 12VDC/24VAC power distribution solution for security cameras and other small devices.

    PD10 Instruction


  • Open the distribution box cover, the circuit board diagram above shows AC24V power input plug (AC24V INPUT), Switch (S1) and DC12V power input plug, and 10 power output plugs (Cam-1 ~ Cam-10) silk-printed with instructions and protection circuit. There are four mounting holes on all four corners.
  • Plug DC power to the 24VAC or 12VDC 2.1/3.5mm power inlet. You can select either 24VAC or 12VDC by switching (S1) switch.
  • There are 10 outputs (Cam-1 ~ Cam-10), 5 on each side. Each output has the regulated maximum amperage 900mA. There are 10 LED indicators which indicate normal operation of each channel. LED will be off when over amperage protection sets in. Please remove the output wire, inspect and correct the problem on that channel before reconnecting the power when the LED is off for the channel.
  • There are 4 precut openings for wire outputs on one each side of the distribution box plus four mounting holes on the panel. Please hook up all the wires before supplying power to the distribution box. Cover the lid to finalize the installation.


Home |  EEFL OEM |  New Products |  News |  About Us |  Contact Info |  Where to Buy |  Reviews & Awards |  12V Remote FAQ
Copyright 2012 Logisys Computer Inc. All rights reserved!